Smart Jumper Cable(Z23)
The advanced intelligent protection clamps with a LED screen can provide over-current protection, short circuit protection, over-load protection, over-voltage protection, over-charge protection, etc, to ensure safety.When Z23 is connected to the car battery, its LED display will show the charge of the car battery.
Wide Adaptable To Most Vehicles
Designed for 12V vehicles with up to 7.0L gasoline 6.5L diesel engine cars, SUVs, motorcycles, trucks and more.
Run Your Vehicle In Seconds
Powerful 2000A peak output jump starter has no problem starting most vehicles with gas engines up to 7.0L or diesels engines up to 6.5L.The powerful lithium battery booster – up to 1000 jump starts on a single charge.
Cold and High Temperature Resistant
M12/M13 uses High magnification polymer Cell, which is more resistant to high and low temperatures than lithium batteries. It can work in the environment of -40℃~ 80℃ to ensure the normal start when the battery stall.
Multifunctional Built-in LED Flashlight
M12/M13 has a built-in LED flashlight with 3 modes: Flashlight, SOS, Strobe. It’s perfect for camping, outdoors, picnic, emergencies, travel, etc. In full charged status,you can use highlight lighting continuously for 72 hours.
Battery Power Display
Dual Output Charger
Two USB output port is desiąned for the fast power supply of 5V / 2.1A for electronics product such as mobile phones.
QC3.0 Charging port
High-Speed Fast Charging 3.0 technology provides a finer range of voltage, from 3.6 to 12V, increasing by 0.2, so that your mobile phone can reach the required target level. Compatible with fast charge 1.0 and fast charge 2.0 devices.
Three-in-one Data Cable Charging(Z24) Instructions
Easy To Use
Easy to use Starter Tool,suitable for anyone.Connect your portable jump starter, start your car, disconnect the jump starter, and then leave.Don’t need to wait for someone to save you, take care of it yourself and leave.
Product Parameters
How to jump start a car?
1. Connect the jump starter to the device. Ensure that the indicator on the battery clips are off.
2. Connect the battery clips correctly to the positive and negative ends of the car battery. The red clip should be connected to the positive (+) end, while the black clip should be connected to the negative (-) end. Then, follow the instructions below:
When the green light is turned on, the connection is correct and the battery can be jump started.
When the red light is turned on and a buzzer sound can be heard, the clips are connected to the wrong ends. Connect the clips correctly and make sure the green light is turned on before jump starting the battery.
When the green light is flickering and a buzzer sound can be heard, the voltage is too low. Press the boost button and wait till the green light stops flickering. Jump start the battery within 30 seconds.
When both the green and red lights are not turned on and no buzzer sound can be heard, the battery may be completed damaged. Ensure that the clips are connected to the correct ends. Press the boost button and wait till thegreen light is turned on. Jump start the battery within 30 seconds
3. After the car is jump started, remove the battery clips.
Packing List of Different Packages
M12+Z23
-1 x Jump Starter
-1 x Jumper Cables(With LED Screen)
-1 x User Manual
M12+Z23+Z12
-1 x Jump Starter
-1 x Jumper Cables(With LED Screen)
-1 x User Manual
-1 x Car Charger
M12+Z23+Z12+Z24
-1 x Jump Starter
-1 x Jumper Cables(With LED Screen)
-1 x User Manual
-1 x Car Charger
-1 x 3 In 1 USB Cable
M13+Z23
-1 x Jump Starter
-1 x Jumper Cables(With LED Screen)
-1 x User Manual
M13+Z23+Z12
-1 x Jump Starter
-1 x Jumper Cables(With LED Screen)
-1 x User Manual
-1 x Car Charger
M13+Z23+Z12+Z24
-1 x Jump Starter
-1 x Jumper Cables(With LED Screen)
-1 x User Manual
-1 x Car Charger
-1 x 3 In 1 USB Cable
window.adminAccountId=240457030;
Reviews
There are no reviews yet.